Hiren's BootCD From USB Flash Drive (USB Pen Drive)
Публикувана от admin на August 31 2011 18:04:56
Как да си направя Hiren's BootCD на флаш USB

Стъпка 1
Сложете вашия USB стик (1GB препоръчително за по новите версии)

Стъпка 2
Изтеглете файла и форматирайте вашата флаш паметUSB Disk Storage Format USB Disk Storage Format USBFormat.zip (34KB)
Screenshot

Стъпка 3
Изтеглетеgrubinst_gui Grub 4 Dos grub4dos.zip (179KB) и ИзтеглетеHirens BootCD 15.1 Grub 4 Dos стартирайте с Администратор
Screenshot

Стъпка 4
Поставете BootCD (10.3 или по-нова) копирайте всички файлове от вашето CD в USB Flash

Step 5
Копирайте файловете grldr и menu.lstот папка grub4dos във вашето USB
Screenshot

Стъпка 6
Можете да тествате вашия USB Drive

Make sure you set your computer to boot from USB Flash Drive

To Enter the BIOS press the "Del" button on your keyboard. Alternatives are "F1", "F2", "Insert", and "F10". Some PC's BIOS might even require a different key to be pressed. Commonly a PC will show a message like "Press [Del] to enter Setup" to indicate that you need to press the "Del" key. Some AMI BIOS require you to enable the option "USB Keyboard Legacy support"!

For AMI BIOS:

  • Go to "Feature Setup". "Enable" these options: "USB Function Support",
    "USB Function For DOS" and "ThumbDrive for DOS". Go to "Advanced Setup".
    Set the "1st Boot Device" to "USB RMD-FDD".
    Reboot the PC and it now should boot from the Usb Stick.

  • Go to "USB Mass Storage Device Configuration". Select "Emulation Type"
    and set it to "Harddisk". Go to the "Boot Menu" and set the "1st boot device" to "USB-Stick". Exit the BIOS, saving the changes.
    you can try "Emulation Type" to "Floppy" or "Forced FDD".

For PHOENIX/AWARD BIOS:

  • Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".